Ross NK Routing Systems RCP-QE Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 68

Ross NK Routing Systems RCP-QE Скачать руководство пользователя страница 9

RCP-QE User Guide (v02)

Introduction • 1–1

Introduction

Thank you for purchasing the Ross Video RCP-QE Remote Control Panel. This remote control panel enables you to
control a routing switcher system from one point. With Ross Video’s reputation for delivering leading-edge routing
switcher equipment and our unsurpassed level of customer service and support, you can look forward to many years
of reliable broadcasting. Please read this thoroughly and retain it for future reference.

The RCP-QE provides flexible connectivity of additional remote control panels and multi-page menu
programming.

Overview of this User Guide

This guide is for installers and operators of the Ross Video RCP-QE. It provides instructions on how to connect the
RCP-QE to your routing switcher system, how to set up a configuration file for the RCP-QE using DashBoard, and
how to operate the RCP-QE. It assumes that you are experienced with general broadcast concepts and that you are
familiar with the planning requirements for a routing switcher system.

«
...
7
8
9
10
11
...
»

Содержание NK Routing Systems RCP-QE





































































Отзывы:

Нет отзывов