Ross NK Routing Systems RCP-QE Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 68

Ross NK Routing Systems RCP-QE Скачать руководство пользователя страница 62

5–8 • Operating the RCP-QE

RCP-QE User Guide (v02)

Resetting Devices

If you want to return to a known operating state and configuration, you can:

• send the default configuration to the RCP-QE (see “

Sending a Configuration File to a Device

” on page 4–33)

• reset the device
• reload the factory defaults

If the RCP-QE fails to accept any configuration files that are sent to it, then you should reset the device. When you
perform a reset, the RCP-QE takes on the last-known operating state and configuration that is stored in memory. If
the RCP-QE fails to reset, then reload the factory defaults.

To reset a device:

1.

Open the RCP-QE Panel Configuration editor (see “

Opening the RCP-QE Panel Configuration Editor

2.

Click

Reboot

.

Viewing Status and Alarms

An indication that alarms are present for a device is visible in the

Basic Tree View

pane. If a device has one or more

alarms, a small circle appears in the icon for the device.

Figure 5.3

Basic Tree View pane showing device with status/alarm indication

The status and alarms are also viewable in the Configuration tab of the Panel Configuration editor.

To view the status and any alarms for an RCP-QE:

1.

Open the RCP-QE Panel Configuration editor (see “

Opening the RCP-QE Panel Configuration Editor

2.

Select the

Configuration

tab.

3.

View the status and alarms in the

Alarms

section.

The status of the RCP-QE is shown via a number of colored indicators:

•

Green

– device is connected and operational.

•

Yellow

– alarm is active. For example, a protect is active on the panel.

•

Red

– device has been rebooted. Refresh the

Basic Tree View

in DashBoard to clear this status.

•

Orange

– no active DashBoard connection. A forced connection is required.

Operating Linked Remote Control Panels

You can link multiple RCP-QEs together, or link them with one or more RCP-ME, RCP-NKMs, or RCP-NKQs, or
combination thereof. The remote control panels must have panel link addresses set, as described in the section
“

Linking Remote Control Panels

” on page 4–29. Once these addresses are set correctly, the remote control panels

Status/Alarm indicator

«
...
60
61
62
63
64
...
»

Содержание NK Routing Systems RCP-QE





































































Отзывы:

Нет отзывов