Ross NK Routing Systems RCP-QE, Руководство пользователя, Страница: 26 / 68

4–6 • Setting Up the RCP-QE RCP-QE User Guide (v02)
Simulated RCP-QE Panel
Inputs/Outputs – source/destination buttons. Click a button to open the Button menu to assign a function to the
button.
Hide Panel – click this button to hide the simulated RCP-QE panel.
Button – click the arrow buttons to select a button from the panel or use the list to select a specific button.
Menu – use the list to select a specific menu configuration for the panel.
Copy From – click this button to open the Copy Menu From dialog box to select a menu configuration to copy.
Configuration Tab
Panel Link Address
Two or more remote control panels may be linked to form a larger physical panel. This is known as panel linking.
Panels are linked when they have the same master address (as specified in the section “
To change the details for
the RCP-QE: ” on page 4–9) and different panel link addresses.
Breakaways
# (read-only) – the list number of the breakaway.
Name – the name assigned for the breakaway. The names are user configurable.
Level Mask (1...32) – click a router level to assign a level mask (level mask selected: ) or de-select a level mask
(level mask de-selected: ).
Clear – click this button to clear all level masks for a given breakaway.
Set – click this button to apply all selected level masks for a given breakaway.
Configuration
Breakaway Reset – select this check box to return to the default breakaway after every switch. The default is
Breakaway 1.
Breakaway Warning Mode – use the list to select a breakaway warning mode:
• Current – if there is a level mismatch compared to the current breakaway, a breakaway warning is shown
when displaying the status.
• Default – if there is a level mismatch compared to the default breakaway (Breakaway 1), a breakaway
warning is shown when displaying the status.
Panel Locked – select this check box to lock the panel buttons.
Machine Control Enabled – select this check box to use machine control to provide reciprocal switching of
RS-422 signals.
Machine Control Level – enter or select a router level for machine control.
Virtual Routing Enabled – select this check box to enable virtual routing. Virtual routing requires an NK-VRC in
an NK series router system.

Virtual routing must be enabled for the RCP-QE to function with an Ultrix router or Ultricore Central Controller.
Comms Retry Delay Factor – enter or select a retry delay factor in milliseconds. Systems require different retry
times depending on the transfer of requests and responses between modules. A value of 50ms is a recommended
default.