Ross nielsen NWE-IP, Руководство пользователя, Страница: 50 / 80

50 • Configuring the AES67 Senders NWE-IP User Guide (v5.0)
Mapping the Audio Channels for the AES67 Sender
You need to specify the IP encapsulation properties for the active audio for each input signal.
To map the audio channels for the AES67 Sender
1. Display the AES67 Sender interface in DashBoard as outlined in “ To display the NWE-IP interfaces in
DashBoard ” on page 29.
The Network Streams tab is automatically selected.
2. Use the # of Audio Sessions field to specify the total number of streams available to the AES67 Sender .
In the example below, the user specified 2 audio streams.
 Click
Default Mapping
to use the default values.
3. Use the
Name
field to assign a unique identifier to the stream.
 The Name is used to help identify the stream within your system and other tabs in the DashBoard window.
4. Use the
Transport IP
field to specify the network socket for the data for the session.
5. Use the
Port
field to specify the source port to connect to the stream. This must match the source you are
attempting to connect to.
6. Use the
# Channels
field to specify the number of audio channels in the specified stream.
The tab updates to display a row for each channel. In the example below, the # Channels field was set to 2.
7. Use the DSCP field to specify the Differentiated Service Code Point value for the network layer service for this
session.
8. Use the Channel field to specify the audio channel within the network stream group you are defining.
9. To allocate an audio stream to a Watermark Encoder channel:
a. Use the NWE Channel field to assign the audio stream to a Watermark Encoder output.
b. Click
Apply
to save the new settings.
10. If your downstream network device supports the Session Description Protocol (SDP):