Ross nielsen NWE-IP, Руководство пользователя, Страница: 33 / 80

NWE-IP User Guide (v5.0) Updating the Network Settings • 33
Updating the Network Settings
Once the NWE-IP is communicating via DashBoard, it is recommended to assign a different static IP address from
the factory default values. These default values were used to initially establish a connection point to the NWE-IP, as
outlined in your NWE-IP Quick Start Guide . This chapter provides instructions for configuring the
Gb1
,
NET1,
and
NET2
ports of the NWE-IP for communication with your facility network and streaming devices.
 Contact your IT Department for more information on changing these settings.
Network Connections to the NWE-IP
There are two Ethernet ports that must be configured on the NWE-IP:
Gb1
and
NET1
. Each port has a specific
purpose:
•
Gb1
port — This port enables the NWE-IP to interface with other devices in your facility, and the computer
running the DashBoard client. After the initial connection is established (as outlined in “ Configuring the Initial
Network Settings ” on page 27), DashBoard is used to update the network settings for the NWE-IP as
determined by your IT Department and network requirements.
•
NET1
port — This port enables the NWE-IP to interface with your facility PTP Grandmaster and enables the
ability to receive and transmit network streams.
•
NET2
port — This port enables protection switching on the NWE-IP as per SMPTE ST 2022-7
Updating the Gb1 Port Settings
Once the NWE-IP is communicating via DashBoard, you may wish to assign a different static IP Address from the
factory default value (which was used to initially establish a connection point to the NWE-IP).
 The
Gb2
port is not implemented.
To update the Gb1 port settings for the NWE-IP
1. Display the Global interface as outlined in “ To display the NWE-IP interfaces in DashBoard ” on page 29.
2. Select the Ethernet tab.
3. Select the
Gb1
tab.