HDBH Series Operating Instructions
6
www.rosscontrols.com
Technical Characteristics Of PNP Inductive Position Switch
Type Of Switch
Contactless inductive position switch with integrated amplifier
Supply Voltage [V]
20-32 V DC
Ripple Max [%]
≤
10
Max Current [mA]
400
Reaction Time [ms]
15
Max Peak Pressure [bar]
400
Mechanical Life
Virtually Infinite
Switch Logic
PNP
1
24 V DC
4
NO output signal
2
NC output signal
3
GND
OUTPUT SIGNAL STATUS FOR EACH VALVE IN THE HDBH SYSTEM
Hydraulic configuration
ON
OFF
ON
OFF
Spool position
Pin 2
Pin 4
S
Note:
PNP Position Switch can be electrically wired by the consumer as NO or NC and then the status
of the output signal will be in accordance to the selected configuration.
= Intermediate spool position corresponding to the hydraulic configuration change.
11. Disposal
Dispose of the valve in accordance with the applicable statutory regulations in your
country.