Ross DAC-9213-PVM, Руководство пользователя, Страница: 21 / 28

DAC-9213-PVM User Manual (Iss. 02B) Setup and Operation
•
3-7
Note The Sony monitor’s component input must be selected, and
the monitor must be set up for the same format as the
DAC-9213-PVM’S output video format.
Table 3. Supported Formats and Input Standards
Analog Output Format
RGB YP
B
P
R
Digital
Input
Standard
Signal
SMPTE/
EBU N10
MII
NTSC
Related
SMPTE/
EBU N10
Y/G
(setup)
0 to 700mV 0 to 700mV
(54 to 700mV)
0 to 714mV
(54 to 714mV)
0 to 700mV
P
B
/B
(setup)
0 to 700mV 0 to 700mV
(54 to 700mV)
0 to 714mV
(54 to 714mV)
-350mV to
+350mV
P
R
/R
(setup)
0 to 700mV 0 to 700mV
(54 to 700mV)
0 to 714mV
(54 to 714mV)
-350mV to
+350mV
525i
Sync 0 to -300mV 0 to -300mV 0 to -286mV 0 to -300mV
Y/G 0 to 700mV 0 to 700mV
P
B
P
R
/RB 0 to 700mV
-350mV to
+350mV
625i
Sync
0 to -300mV 0 to -300mV
Y/G
0 to 700mV
0 to 700mV
P
B
P
R
/RB
0 to 700mV
-350mV to
+350mV
HD
(1080i,
720p)
Sync -300mV to +300mV
-300mV to
+300mV
Output Video Level
Use this menu to adjust the component video output level by up to ± 25%. This
setting affects all input standards and output formats. Pressing, or holding, the
Up button will increase the output video level on all three analog output signals.
Pressing, or holding, the Down button will decrease the output levels. This
menu has a 2 button quick default to unity, the default value. Press both Down
and Up buttons at the same time and hold for three seconds.