2-2
•
Installation
DAC-9213-PVM User Manual (Iss. 02B)
Installation
The DAC-9213-PVM is compatible with all Sony monitors which can accept
Sony model
BKM-120D
SDI and
BKM-142HD
HD-SDI input modules.
Compatible Monitors
The following monitor models accept the DAC-9213-PVM:
Model
Description
BVM-D9H1U / 5U
9”, 4x3, HD Capable
BVM-D14H1U / 5U
14”, 4x3, HD Capable
BVM-14L5/1
14”, 4x3, HD Capable
BVM-20L5/1
20”, 4x3, HD Capable
PVM-14L5/1
14”, 4x3, HD Capable
PVM-20L5/1
20”, 4x3, HD Capable
Procedure
Use the following steps to install the DAC-9213-PVM module.
1. Power off the monitor.
2. On the rear of the monitor, locate the adapter input slot(s).
3. Using your fingers or a slot screwdriver, unscrew the thumbscrews at
the top and bottom of the leftmost input slot cover.
4. Remove the cover and store it in a convenient location.
5. Insert the DAC-9213-PVM in the leftmost slot until the edge
connector on the rear of the module seats firmly in the monitor’s
connector socket.
Note
If any other SONY option modules are installed, THEY must
be installed from the left, and THEN the DAC-9213-PVM is
installed.
Sony monitors will only recognize option modules from the
left towards the right. If the Sony finds an option slot empty,
it will not recognize any other Sony modules to the RIGHT of
the empty slot.
6. When the DAC-9213-PVM is seated level and flush with the
monitor’s rear surface, tighten the thumbscrews to secure the module.