DAC-9213-PVM User Manual (Iss. 02B)
Setup and Operation
•
3-3
Status and Selection LEDs
The front panel of the module has four LEDs (STAT, UP, DOWN, PWR) that
display the status of the input signal, and indicate menu function and
configuration selections. The LED displays are described in the following
table:
Table 1. Selection and Status LED Descriptions
LED
Reference Function
On
LED will be
continually lit
when a valid* input signal is
present and no anomalies have been detected. The unit is
functioning normally.
Flashing
When LED is flashing, there is a problem between the SDI
input standard and the selected input standard (menu item 1).
Status
(Green)
Off
When off, this LED indicates that a loss of power has
occurred.
Up
(Yellow)
Function
Menu
For menu items that have
multiple selections
, the LED will
be in a state as indicated in the
Function Setup and
Configuration Menu
.
Down
(Yellow)
Function
Menu
For menu items that have
multiple selections
, the LED will
be in a state as indicated in the
Function Setup and
Configuration Menu
.
On
When continuously lit, this LED indicates that the unit has
power.
Power
(Green)
Off
When off, this LED indicates that a loss of power has
occurred.
*
A valid signal is defined as any SD or HD SDI signal standard, input into the
DAC-9213-PVM, which matches the setting of the
Video Standard
that has
been selected in the Function Setup and Configuration Menu. In other
words, if the converter is set for 525i video, then only a 525i video signal
input will cause the Status LED to be lit.
Any other analog, SD or HD SDI signal, of a different standard (625i, 1080i,
etc.), that is input into the converter will be invalid and the Status LED will
be flashing.