Ross CARBONITE GVG10, Быстрый старт, Страница: 5 / 8

Data / Notes Byte Code Length ME / Keyer Name
*Currently ME Specific.
-- 7D 2 ME* Read Fade to Black Rate
** CC 5 ME Write ME Auto Transition Rate
** CD 5 Keyer Write Keyer Mix Rate
*Currently not Supported. Fade
to Black = Transition Rate
** FD 5 --* Write Fade to Black Rate
Supports memories 0-255. All
buses are selected with 00 for the
effects address.
<mem#> DA 3 ME Learn Into Memory
Supports memories 0-255. All
buses are selected with 00 for the
effects address.
<mem#> DB 3 ME Recall From Memory
-- 6C 2 -- Read Software Version
Field Mark Only.
-- 6D 2 -- Read Field Mode
Field Mark Only. 0 or 1 ED 3 -- Write Field Mode
*Data byte is unused. D0* F2 3 -- All Stop
0 78 3 -- Read Lamp Status
Included for GVG100 spec
completeness only.
-- F8 13 -- Write Lamp Status
<button> FB 3 Any Write Button Press
Table 6: **Transition Rates
Notes Bit Data Byte
0=select elements, 1=select elements and perform transition 7 1
4=select key 1, 5=select key 2, 6=select BKGD 4-6
binary coded decimal (meaning valid values are b0-b1001, or 0-9) 0-3
unused 6-7 2
4=select key 3, 5=select key 4 4-5
binary coded decimal (meaning valid values are b0-b1001, or 0-9) 0-3
unused
4-7 3
binary coded decimal (meaning valid values are b0-b1001, or 0-9) 0-3
Table 7: Supported Lamps
Notes Bytes ME / Keyer Name
Trying to turn off results in a protocol error. 0x00-0x09 ME Program Bus 0-9
Trying to turn off results in a protocol error. 0x0A ME Program Bus On-Air
0x0B ME Auto Trans
5