Ross CARBONITE GVG10, Быстрый старт, Страница: 4 / 8

Source Map-To
Input BNC 1-4 1-4
-- 5
Matte 6
Input BNC 5-6 7-8
Media-Store channels 1-2 9-10
Program (Aux only) 11
Preview (Aux only) 12
Clean Feed (Aux only) 13
Chroma Key Alpha (Aux only) 14
Note: For the following table, ME can be an ME, a MiniME
™
, a MultiScreen, or an Aux bus.
Table 5: Supported GVG100 Commands
Data / Notes Byte Code Length ME / Keyer Name
-- 41 2 ME Read ME Program Bus
-- 42 2 ME Read ME Preset Bus
-- 43 / 44 2 Keyer Read Keyer Bus
An invalid xpt request returns a
protocol error.
<xpt> C1 3 ME Write ME Program Bus
An invalid xpt request returns a
protocol error.
<xpt> C2 3 ME Write ME Preset Bus
An invalid xpt request returns a
protocol error.
<xpt> C3 / C4 3 Keyer Write Keyer Bus
<control> 45 3 -- Read Analog
<control> <lsb> <msb> C5 5 -- Write Analog
-- 46 / 47 3 ME / Keyer Read Light On / Off
<lamp> C6 / C7 3 ME / Keyer Write Lights On / Off
-- 48 2 ME Read Wipe Pattern
Valid wipes are 0-9, as per the
wipe pattern buttons. An invalid
wipe number returns a protocol
error.
<wipe> C8 3 ME Write Wipe Pattern
-- 4A 2 ME Read Transition Mode
Last 5 bits used; bit 0:key 2, bit
1:key 1, bit 2:BKGD, bit 3:key 3, bit
4:key 4.
<mode> CA 3 ME Write Transition Mode
-- 4C 2 ME Read ME Auto Transition Rate
4D 2 Keyer Read Keyer Mix Rate
4