20
21
Wireless N300 Mini USB Wi-Fi Adapter
Wireless N300 Mini USB Wi-Fi Adapter
User Manual
User Manual
RNX-N300UBv2
RNX-N300UBv2
Client Configuration Utility provides functions you can access from the bottom
of configuration menu:
Wi-Fi Protected Setup (WPS) is the latest wireless network technology that
makes wireless network setup very simple. If you have WPS-enabled wireless
access point and you want to establish a secure connection to it, you don’t have
to configure the wireless access point and set up data encryption by yourself.
Just follow 3 simple steps: go to the WPS setup page of this wireless adapter,
click a button, then press a specific button or enter an 8-digit code on the
wireless access point you wish to establish a secure connection.
This wireless network adapter is compatible with WPS. To use this function,
the wireless access point you wish to connect to must support WPS functions.
Please follow the instructions below to establish secure connection between
WPS-enabled wireless access point and your wireless network adapter
(wireless network adapter only supports PIN code method).
4.3 Miscellaneous Settings
4.4 Establish Secure Connection with AP by WPS
Figure 4-11
Figure 4-12
Figure 4-13
Description of Functions:
Show Tray Icon
Check this box to show an icon on system tray.
Uncheck this box to hide it.
Radio Off
Switch wireless radio off. Wireless network functionalities
are disabled.
Disable Adapter
Disable wireless network adapter. All functionalities of
configuration menu will disappear. To resume, uncheck
“Disable Adapter”.
Virtual Wi-Fi
Allowed
Start virtual Wi-Fi SoftAP. This function can extend
wireless coverage and share internet connection with
others.
1.
2.
Right-click Client Configuration Utility icon, and click “Open Config Utility”.
Click “Wi-Fi Protect Setup” menu and click “Pin Input Config (PIN)” button.
