Rosenbauer NAUTILUS 4/1, Информация пользователя

Страница: 22 / 144

22
Rosenbauer – NAUTILUS 4/1 & NAUTILUS 4/1 ECO
liability for damage caused by improper performance of repairs.
CAUTION: Please note that, according to product liability law, we are
not liable for damage caused by our machine but due to unqualified
repairs not performed by the manufacturing works or an authorized
service center, or by the use of non-original replacement part.
7. TROUBLESHOOTING
Malfunction Cause Remedy
Pump not running,
pump stopping
No line voltage or mains
power failure Check voltage, check that the
power supply is sufficiently fused
Damaged cable
Call Rosenbauer customer
service to replace the cable
Impeller jammed
See Section 6.3. “Checking and
cleaning the impeller” in this Guide
Motor protection switch
engaged See Section 3.2. “Motor Protection”
in this Guide
Residual current circuit
breaker on power supply
triggered
Call a qualified electrician to repair
the pump
Poor pump
performance
The pump has sunk too deep
into the mud Lift the pump and place on a firm
base, or hang up the pump
Inlet strainer blocked
Clean the strainer; if necessary,
place the pump in a wicker basket
Kink in hose
Route the hose to be kink-free, use
hose kink protection
Internal water channels in
pump blocked Flush the pump with fresh water at
high pressure
Impeller or diffuser worn
Call Rosenbauer customer
service to replace the parts