Rosen Entertainment Systems
Copyright 2007 all rights reserved
HE0780DInstallation Guide
AP1024 Rev A
Page 7
Step 3:
PRE-DELIVERY AND RE-TEST
a. Start the vehicle (ensure that it is safe to do so, there are no tools or people under the hood)
b. Perform the following steps
•
Insert a DVD (in good condition) and select play
•
Re-check IR headphones and FMT audio
•
Eject the disc
•
Remove the protective films and clean the unit as needed
c. Place the Owners Information package in the glove compartment
d. Place the IR headphones, remote control and game controller in a convenient location
10 Installer Setup
To access install setup menu: use the remote control, press EJECT-ENTER-1-1-2-0
•
To change AUX 2 input labeling, highlight AUX 2 label and scroll left/right using arrows.
•
To select EXT FMM, highlight EXT FMM and select on.
•
POD ADDR is used to manually set pod address
Auto
à
address is based on which port the pod is plugged into.
•
Selecting A or B allows you to manually set the pod’s address
When manually selecting POD ADDR, an OSD will appear on opposite pod displaying what pod it
will be
Specifications
Supply Voltage
: 12V (+) ACC negative ground system, 11-16VDC operating range
Current Consumption
: 7A max operating
Video Signal
: Composite video 1.0Vp-p 75 , NTSC/PAL
Audio Signal
: Audio Output : 2Vrms, line output
IR Audio Signal
: Channel A= 2.3 MHZ / 2.8 MHZ and Channel B= 3.2 MHZ / 3.8 MHZ
Discs Played
: (1) 5” (12cm) DVD-VIDEO Disc
(2) Compact Disc (CD-DA/CD-R/CD-RW/MP3)
Operating Temperature
: 0C to +60C
Note: Specifications and designs are subject to modification without notice.
