Rosemount 396R Скачать руководство пользователя страница 15

Страница: 15 / 64

Installation

Instruction Manual

Installation

LIQ-MAN-396R-396RVP

March 2017

Thread the male connector body tightly into the ball valve assembly. DO NOT tighten the

hex nut on the male connector body; doing so would not allow the sensor to be inserted

through the ball valve.

Pull back hard on the sensor assembly, as if trying to remove the sensor, to be certain that

the sensor cannot come free of the ball valve assembly. The built-in retraction stop will butt

against the shoulder of the male connector if properly installed.

After confirming that the sensor assembly is properly secured by the valve assembly, the

valve may be opened and the sensor positioned into the process at the desired depth and

orientation.

While holding the sensor in position, tighten the hex nut of the male connector to firmly

secure the sensor in place. When the hex nut is tightened, the Teflon ferrule inside the

compression fitting clamps the sensor tube.

2.3.2

Installation Without Ball Valve

The Rosemount 396R Sensor may be installed through a weldalet or pipe tee or “Y” when used with

a process connector (PN 23166-00 or 23166-01). The sensor should be installed within 80° of

vertical, with the electrode facing down.

The sensor must be captured by the valve assembly and the male connector so that it cannot be blown

free by process pressure if mishandled during insertion or retraction.

CAUTION

Over tightening the hex nut may damage the ferrule.

CAUTION

A stainless steel ferrule is available if the Teflon ferrule does not inadequately grip. When using the

metallic ferrule, care must be taken to avoid over tightening and damaging the sensor tube. If the male

connector leaks during insertion or retraction, replace the O-ring in the male connector.

NOTICE

Figure 2-1: Exploded View of Ball Valve Kit PN 23240-00 used with process connector

PN 23166-00 (or PN 23166-01)

Содержание 396R

































































Результаты поиска

Содержание 396R

Отзывы:

Похожие инструкции для 396R

Бренды по названию

Популярные бренды

Rosemount 396R, Инструкция по эксплуатации

Результаты поиска

Содержание 396R

Отзывы:

Похожие инструкции для 396R

Бренды по названию

Популярные бренды