Rosemount 248 Скачать руководство пользователя страница 3

Страница: 3 / 80

Reference Manual

00809-0100-4825, Rev BB
August 2005

Rosemount 248

www.rosemount.com

Rosemount 248 Transmitter and
Temperature Monitoring
Assembly

Rosemount 248 Temperature Monitoring Assembly may be protected by one or more U.S.
Patents pending. Other foreign patents pending.

Rosemount 248 Hardware Revision

Headmount
Railmount

HART

Device Revision

HART Communicator Field Device Revision

4
1
5.1
Dev v1, DD v1

NOTICE

Read this manual before working with the product. For personal and system safety, and for
optimum product performance, make sure to thoroughly understand the contents before
installing, using, or maintaining this product.

The United States has two toll-free assistance numbers and one international number.

Customer Central

1-800-999-9307 (7:00 a.m. to 7:00 P.M. CST)

National Response Center

1-800-654-7768 (24 hours a day)
Equipment service needs

International

1-(952) 906-8888

The products described in this document are NOT designed for nuclear-qualified
applications.

Using non-nuclear qualified products in applications that require nuclear-qualified hardware
or products may cause inaccurate readings.

For information on Rosemount nuclear-qualified products, contact a Emerson Process
Management Sales Representative.

Содержание 248

















































































Результаты поиска

Содержание 248

Отзывы:

Rosemount 248, Справочное руководство, Страница: 3 / 80

Результаты поиска

Содержание 248

Отзывы: