WARNING
•
Before connecting a HART
®
communicator in an explosive atmosphere, ensure the instruments in
the loop are installed in accordance with intrinsically safe or non-incendive field wiring practices.
•
In an Explosion-Proof/Flameproof installation, do not remove the transmitter covers when power
is applied to the unit.
Process leaks may cause harm or result in death.
•
Install and tighten process connectors before applying pressure.
WARNING
Replacement equipment or spare parts not approved by Emerson for use as spare parts could reduce
the pressure retaining capabilities of the transmitter and may render the instrument dangerous.
•
Use only bolts supplied or sold by Emerson as spare parts.
•
Refer to page 208 for a complete list of spare parts.
Improper assembly of manifolds to traditional flange can damage sensor module.
•
For safe assembly of manifold to traditional flange, bolts must break back plane of flange web
(i.e., bolt hole) but must not contact sensor module housing.
Contents
System readiness........................................... 5
Mount the transmitter................................... 7
Housing rotation..........................................14
Set the switches...........................................15
Connect the wiring and power up................ 16
Verify configuration..................................... 19
Trim the transmitter.................................... 23
Safety instrumented systems.......................26
Rosemount
™
2051 Product Certifications.....27
February 2019
Quick Start Guide
Quick Start Guide
3
