Rosemount 1054B, Инструкция по эксплуатации

Страница: 2 / 55

WARNING
ELECTRICAL SHOCK HAZARD
Making cable connections to and serv-
icing this instrument require access to
shock hazard level voltages which can
cause death or serious injury.
Relay contacts made to separate
power sources must be disconnected
before servicing.
Electrical installation must be in
accordance with the National
Electrical Code (ANSI/NFPA-70)
and/or any other applicable national
or local codes.
Unused cable conduit entries must be
securely sealed by non-flammable
closures to provide enclosure integrity
in compliance with personal safety
and environmental protection require-
ments.
For safety and proper performance
this instrument must be connected to
a properly grounded three-wire
power source.
Proper relay use and configuration is
the responsibility of the user.
Do not operate this instrument without
front cover secured. Refer installation,
operation and servicing to qualified
personnel.
SS-MA54
Feb. 1992
ESSENTIAL INSTRUCTIONS
READ THIS PAGE BEFORE PROCEEDING!
Rosemount Analytical designs, manufactures, and tests
its products to meet many national and international stan-
dards. Because these instruments are sophisticated tech-
nical products, you must properly install, use, and main-
tain them to ensure they continue to operate within their
normal specifications. The following instructions must be
adhered to and integrated into your safety program when
installing, using, and maintaining Rosemount Analytical
products. Failure to follow the proper instructions may
cause any one of the following situations to occur: Loss of
life; personal injury; property damage; damage to this
instrument; and warranty invalidation.
• Read all instructions prior to installing, operating, and
servicing the product. If this Instruction Manual is not
the correct manual, telephone 1-800-654-7768 and the
requested manual will be provided. Save this
Instruction Manual for future reference.
• If you do not understand any of the instructions, contact
your Rosemount representative for clarification.
• Follow all warnings, cautions, and instructions marked
on and supplied with the product.
• Inform and educate your personnel in the proper instal-
lation, operation, and maintenance of the product.
• Install your equipment as specified in the Installation
Instructions of the appropriate Instruction Manual and
per applicable local and national codes. Connect all
products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel
to install, operate, update, program, and maintain the
product.
• When replacement parts are required, ensure that qual-
ified people use replacement parts specified by
Rosemount. Unauthorized parts and procedures can
affect the product’s performance and place the safe
operation of your process at risk. Look alike substitu-
tions may result in fire, electrical hazards, or improper
operation.
• Ensure that all equipment doors are closed and protec-
tive covers are in place, except when maintenance is
being performed by qualified persons, to prevent elec-
trical shock and personal injury.
Rosemount Analytical Inc.
Uniloc Division
2400 Barranca Parkway
Irvine, CA 92606 USA
Tel: (949) 863-1181
WARNING
This product is not intended for use in the light industrial, residential or commercial environment, per the instrument’s certi-
fication to EN50081-2. Be sure to disconnect all hazardous voltage before opening.
The unused conduit openings need to be sealed with NEMA 4X or IP65 conduit plugs to maintain the ingress protection rat-
ing (IP65). No external connection to the instrument of more than 60VDC or 43V peak allowed with the exception of power
and relay terminals. Any violation will impair the safety protection provided.