background image

8

2. 

Safety

2.1  General safety

DANGER

Inadequate protective equipment can cause injuries!

Effective safety equipment contributes to your personal safety.

•  Always wear a helmet.
•  Always wear highly visible and reflective clothing.

DANGER

Improperly installed components can cause serious crashes!

Improperly installed components may loosen during the ride!

•  Always follow the installation instructions included in this manual.
•  If in doubt, please consult the ROSE service or a qualified bicycle mechanic.

DANGER

Risk of accident due to sudden total failure of pre-damaged components!

A fall or unforeseeable manoeuvres can pre-damage components of your bike. Even though you might not 
immediately notice those damages, it is always possible that pre-damaged components deform or break while riding.

•  Regularly check your components for damages.
•  Components that are subject to high stress must be regularly replaced and checked by a qualified bicycle 

mechanic.

2.2  Carrying children on a bike

DANGER

Risk of injury when carrying kids in a bike seat or bike trailer!

Carrying children in a bike seat or bike trailer inappropriately may lead to accidents with a high injury potential.

•  Please note the information in chapter “6. Cycling with kids“ on page 29.
•  Never carry a child in a bike seat or a bike trailer if not all of the conditions in chapter “6. Cycling with kids“ on 

page 29 are complied with.

2.3  Safe use of the brakes

DANGER

Risk of accident due to reduced braking performance caused by brake pads that are not broken in!

Disc brakes can only achieve full braking power when the brake pads are broken in. Choose a place off public roads 
to break in the pads.

•  Brake 20 to 30 times with the front or rear brake from a speed of 30 km/h down to 5 km/h and repeat the 

process for the second brake. You should brake as hard as possible without locking one of the wheels.

•  Please also see the brake manufacturer’s instructions for more information (see enclosed manual).

Содержание Xtra Watt 2019







































Отзывы: