Rose electronics Xtra Watt 2019 Скачать руководство пользователя страница 28

Страница: 28 / 38

Charging the battery while fitted to the e-bike

1. Press the on/off button “

“ to switch off the battery

pack.

2. Clean the cover of the charging port (1) and the area

around it.

→

Make sure the charging port doesn’t get dirty when
plugging in the charging cable.

3. Remove the cover of the charging port (1).
4. Plug the charging cable (3) into the port (2) on the

bicycle frame.

5. Plug the mains cable (5) into the socket on the charger

(4).

6. Connect the mains cable to a 230 V mains socket.

→

Once the mains cable is connected, the battery is
charged automatically.

→

During the charging process, the charge indicator
LEDs on the battery light up.
Each permanently lit LED is equivalent to
approximately 20% capacity. The flashing LED
indicates the charging of the next 20%.

→

Once the e-bike battery is fully charged, the LEDs
turn off immediately and the on-board computer is
switched off. Charging is completed.

7. Disconnect the charging cable (3) from the socket (2), if

need be, and unplug the mains cable (5).

Removing the battery pack for charging

1. Open the lock (2) with the key (3).

→

The battery pack is released and secured by a safety
restraint (4).

2. Press down the safety restraint (4) to completely unlock

the battery.

3. Remove the battery pack from the frame.

Charging the battery when removed from the e-bike

1. Plug the charging cable (3) into the port on the battery

pack (2).

2. Plug the mains cable (5) into the socket on the charger

(4).

3. Connect the mains cable to a 230 V mains socket.

→

Once the mains cable is connected, the battery is
charged automatically.

→

During the charging process, the charge indicator
LEDs

(1) light up.

Each permanently lit LED is equivalent to
approximately 20% capacity. The flashing LED
indicates the charging of the next 20%.

→

Once the e-bike battery is fully charged, the LEDs
turn off immediately and the battery is switched off.
Charging is completed.

4. Disconnect the charging cable (3) from the socket (2), if

need be, and unplug the mains cable (5).

5. Fit the battery pack to the frame of your bicycle if need be (see “5.3 Installing the battery“ on page 23).

Содержание Xtra Watt 2019







































Результаты поиска

Содержание Xtra Watt 2019

Отзывы:

Бренды по названию

Популярные бренды

Rose electronics Xtra Watt 2019, Руководство пользователя

Результаты поиска

Содержание Xtra Watt 2019

Отзывы:

Бренды по названию

Популярные бренды