Rose electronics ORION XC Скачать руководство пользователя страница 75

Страница: 75 / 114

Orion XC Installation and Operations Manual

Import Options

Configuration lists are imported in this menu.

Figure 59. Importing Configuration Lists through the Java Tool

To import, proceed as follows:

1. Select

File > Import

in the menu bar.

2. After opening the menu, select the list to import (

Extender, CPU, Console

User

3. Select the directory of the list to import.
4. Confirm the import with the

Finish

button.

Firmware Update

This includes updating the firmware on the Orion XC matrix and the extenders. Firmware update is only
available through the Java Tool.

Matrix Update

The firmware of the matrix can be updated in this menu.

Notes:



Only use computers to update the matrix that are self-sustaining and not integrated in the KVM
extender / matrix setup.



Ensure that the computer used for the update does not go into standby mode or sleep mode during
the update.



Ensure that the configuration has been saved externally before the update is started.

Preparation

Take the following steps in order prepare for the matrix update:

1. Save the matrix configuration externally.
2. Open

Extras > Options

in the menu bar and enter in the

Firmware Directory

setting the directory

from which the update files should be sourced by default.

Содержание ORION XC



















































































































Результаты поиска

Содержание ORION XC

Отзывы:

Бренды по названию

Популярные бренды

Rose electronics ORION XC, Руководство пользователя

Результаты поиска

Содержание ORION XC

Отзывы:

Бренды по названию

Популярные бренды