SAFETY
Installation and Operations Manual
13
Safety
MultiVideo DVI has been tested for conformance to safety regulations and
requirements, and has been certified for international use. Like all electronic
equipment, the MultiVideo DVI should be used with care. To protect yourself from
possible injury and to minimize the risk of damage to the Unit, read and follow these
safety instructions.
Follow all instructions and warnings marked on this Unit.
Except where explained in this manual, do not attempt to service this unit
yourself.
Do not use this unit near water.
Assure that the placement of this unit is on a stable surface or rack mounted.
Provide proper ventilation and air circulation.
Keep power cord and connection cables clear of obstructions that might cause
damage to them.
Use only power cords, power adapter and connection cables designed for this
Unit.
Use only an earth grounded (three-wire) electrical outlet.
Keep objects that might damage this Unit and liquids that may spill, clear from
this Unit. Liquids and foreign objects might come in contact with voltage points
that could create a risk of fire or electrical shock.
Operate this Unit only when the cover is in place.
Do not use liquid or aerosol cleaners to clean this Unit. Always unplug this Unit
from its electrical outlet before cleaning.
Unplug this Unit from the electrical outlet and refer servicing to a qualified
service center if any of the following conditions occur:
The power cord or connection cables are damaged or frayed.
The Unit has been exposed to any liquids.
The Unit does not operate normally when all operating instructions have
been followed.
The Unit has been dropped or the case has been damaged.
The Unit exhibits a distinct change in performance, indicating a need for
service.
Documentation reference symbol. If the product is marked with this
symbol, refer to the product
documentation to get more information about the product.
WARNING
A WARNING in the manual denotes a hazard that can cause
injury or death.
CAUTION
A CAUTION in the manual denotes a hazard that can damage
equipment.
Do not proceed beyond a WARNING or CAUTION notice until you have understood
the hazardous conditions and have taken appropriate steps.
Grounding
There must be an un-interruptible safety earth ground from the main power source to
the product’s input wiring terminals, power cord, or supplied power cord set.
Whenever it is likely that the protection has been impaired, disconnect the power cord
until the ground has been restored.
