INSTALLATION
4
Installation and Operations Manual
Installation
Installation of the MultiVideo DVI unit consists of:
1.
Connecting the User console equipment to the unit
2.
Connecting the USB peripherals to the unit
3.
Connecting the Computers to the unit
4.
Applying power to all equipment
The following installation instructions are a guide to properly connecting all of the
equipment to the MultiVideo DVI unit. No special order is required but it is
recommended that power to the equipment and to the MultiVideo DVI unit be
applied after all connections have been made.
1- User Console Connections
User Console Connections
Connect a set of stereo
speakers to the audio input
jack if needed
Connect the USB keyboard
and USB mouse to the
corresponding USB ports
on the rear panel.
Up to 4 video monitors with
DVI-I or DVI-D connectors
can be connected to the
DVI-I female connectors on
the rear panel.
If you need to extend the
monitors past the 16’ max DVI
cable length, Rose Electronics’
CrystalView DVI CATx or Fiber
products can extend the
distance up to 450’ over CATx
cable or up to 33,000’ over fiber
cabling.
2- Connecting the USB peripherals to the unit
USB Peripheral Connections
Connect up to 2 supported
USB peripherals to the USB
2.0 switched ports labeled
USB 1 and USB 2.
These USB ports provide
enumerated (transparent)
switching
