background image

The AnoKiosk™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part
#02INAnoKioskRigidBase Rail

Incept-09.20.02

Instruction Sheet (side 2)

Instructions for Assembly continued

7

Step 3

Lay out the bottom rails on the floor as
they will be configured.

Step 4

Assemble the vertical rail assemblies
onto the upward facing corner brackets
already inserted into the bottom rails.
All four brackets should go into the
vertical rails at one time.

Note:

 (4 way only) The last vertical

rail will be tensioned. This is normal.

Step 5

Insert corner brackets into ends
of split rails, 1 per end. Use thumb
as shown in illustration.

Step 6

Assemble split rails onto top ends
of vertical rails, one inside and one
outside of each side of the AnoKiosk.

Step 7

Insert and change signs through top
of each side.

AnoKiosk™

3

4

3-Way

4-Way

5

6

Содержание ANOKIOSK WITH BASE RAIL

Страница 1: ...other edge of spine Repeat for all vertical rails and spines Step 2 Carefully insert corner brackets into ends of bottom rails using thumb as shown in illustration Two brackets per end of each rail Bracket can bend if forced Detail It is important that the corner bracket tension tab faces toward outside of frame 2b AnoKiosk Instructions for Assembly Kiosk spine 06 2175 Corner brackets Parts Single...

Страница 2: ...the upward facing corner brackets already inserted into the bottom rails All four brackets should go into the vertical rails at one time Note 4 way only The last vertical rail will be tensioned This is normal Step 5 Insert corner brackets into ends of split rails 1 per end Use thumb as shown in illustration Step 6 Assemble split rails onto top ends of vertical rails one inside and one outside of e...

Страница 3: ...al rail Step 1b Slide another vertical rail onto the other edge of spine Repeat for all vertical rails and spines Step 2 Carefully insert corner brackets into ends of bottom rails using thumb as shown in illustration Two brackets per end of each rail Bracket can bend if forced Detail It is important that the corner bracket tension tab faces toward outside of frame 2b AnoKiosk Instructions for Asse...

Страница 4: ...ed Step 4 Assemble the vertical rail assemblies onto the upward facing corner brackets already inserted into the bottom rails All four brackets should go into the vertical rails at one time Note 4 way only The last vertical rail will be tensioned This is normal Step 5 Insert corner brackets into ends of split rails 1 per end Use thumb as shown in illustration Step 6 Assemble split rails onto top e...

Отзывы: