The AnoKiosk™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part
#02INAnoKioskRigidBase Rail
Incept-09.20.02
Instruction Sheet (side 2)
Instructions for Assembly continued
7
Step 3
Lay out the bottom rails on the floor as
they will be configured.
Step 4
Assemble the vertical rail assemblies
onto the upward facing corner brackets
already inserted into the bottom rails.
All four brackets should go into the
vertical rails at one time.
Note:
(4 way only) The last vertical
rail will be tensioned. This is normal.
Step 5
Insert corner brackets into ends
of split rails, 1 per end. Use thumb
as shown in illustration.
Step 6
Assemble split rails onto top ends
of vertical rails, one inside and one
outside of each side of the AnoKiosk.
Step 7
Insert and change signs through top
of each side.
AnoKiosk™
3
4
3-Way
4-Way
5
6
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
