Rosco CubeConnect, Руководство пользователя

Страница: 21 / 37

Wireless In/DMX Out
21
When
Wireless In Mode
is selected, the 1/2 universe (channels 1-254) of
MINI-SSC data coming in on the wireless antenna is converted and sent out as
full speed DMX data on the DMX OUT connector.
This is similar to the BLUETOOTH Mode and the DB9 SERIAL Mode in that
MINI-SSC data coming into the unit is converted and sent back out on the DMX
OUT connector. The only difference is that the input data in this case is on the
wireless antenna.
When a Transceiver is used as a DMX End Point (i.e. Wireless IN/DMX Out
Mode), it should be paired to the sending Transceiver using the "LEARN”
Button. A single push of the LEARN Button on the receiving Transceiver will
result in 3 quick flashes of the Learn Status LED indicating the learning has
taken place. Holding in the LEARN BUTTON for 12 seconds will cause all
learned address to be forgotten, and is indicated by an extended amount of
flashing on the Learn Status LED.