RORYCO Crowdbeamer, Руководство по эксплуатации устройства

Страница: 9 / 32

3 The crowdbeamer device
Figure 2: Aspects of the crowdbeamer device
The Top
Figure 3: Top of the crowdbeamer device
Power/Function button
This button is used to:
• Switch the device ON. When the device is powered up, status information is shown in the
OLED display. If nothing is displayed, you need to charge the battery (page 17).
• Perform a specific function when pressed quickly while the device is in use. The function to be
executed is set on the system page (page 30) of the configuration pages. These include:
- setting a new WiFi password,
- pause the presentation, (see
Using crowdbeamer for a presentation (page 23).)
- nothing.
• Switch the device OFF. To switch the device off, press and hold the button for several seconds
until you see "Bye" in the OLED display.
OLED display
The displays shows the current status of the device. Information about what is displayed is
described throughout this manual.
crowdbeamer device manual Version 1.2
©
RORYCO NV Published 2017-07-15 9