RORYCO Crowdbeamer, Руководство по эксплуатации устройства

Страница: 22 / 32

4 Crowdbeamer for the presenter
Figure 11: Connecting to a digital camera with HDMI
4. Switch crowdbeamer ON, using the power button.
5. The display will show that the device is "streaming" and the type of input connection.
6. You can now:
- Optionally connect crowdbeamer to a room display (page 22).
- Invite your audience to start sharing your screen.
4.4 Connect a room display
You can display your output on a room display; crowdbeamer can be connected to a projector or flat
panel display.
Connecting the device to a room display
This procedure requires an HDMI or VGA cable that will connect crowdbeamer to the projector or
display panel.
1. Connect your presentation device (page 18) to the crowdbeamer input side.
2. Connect a cable between the HDMI-out or VGA-out connections on the crowdbeamer device and
room display.
Note: The maximum length of the output cable is 2m.
Figure 12: Connect to a room display using HDMI
22 crowdbeamer device manual Version 1.2
©
RORYCO NV Last updated 2017-08-26