manualshive.com logo in svg

Rorke Data The Galaxy 65, Руководство пользователя

Поделиться
Скачать
Rorke Data The Galaxy 65 Скачать руководство пользователя страница 202

Galaxy 65 User Guide

182

F.1.6 Blinking a Drive LED

You can blink the LED on a specific drive one of two ways:

• From the Drive Utilities Menu (only works for a single drive; see below)

• From the Display Drives list when you add a pool spare or display all drives (works for multiple 

drives). Select the drive and press 

B

. Press 

B

 again to stop the blinking.

To blink a drive LED from the Drive Utilities Menu:

1

From the System Menu, select 

Utilities Menu 

and press 

Enter

.

The Utilities Menu displays.

2

Select 

Drive Utilities Menu 

and press 

Enter

.

The Drive Utilities Menu displays.

3

Select 

Blink Drive LED

 and press 

Enter 

The Select Drive screen displays.

4

Select the drive you want and press 

Enter

.

The drive continues blinking its LED until you do one of the following:

• Press 

Esc

 before the Disk Array Administrator times out.

• Repeat the blink LED command, which toggles the blink LED command off.

5

Press 

Esc

 to stop blinking the LED.

F.1.7 Taking Down a Drive

Caution

This function is only for testing and could result in data loss. It should not be used in normal operation.

The Down Drive function sets the status of a drive in a fault-tolerant array to down. This forces the Galaxy 
65 Subsystem to remove it from the array and marks the array as critical. At this point, you will be unable 
to take down any additional drives in the array.

If you have a properly sized dedicated or pool spare, this will cause a reconstruct on the affected array. 
For more information, see 

C.2.5, ”Reconstructing an Array”, on page 126

.

To take down a drive:

1

From the System Menu, select 

Utilities Menu 

and press 

Enter

.

The Utilities Menu displays.

2

Select 

Drive Utilities Menu 

and press 

Enter

.

The Drive Utilities Menu displays.

3

Select 

Down Drive 

and press 

Enter 

The Select Drive screen displays showing drives that are array members.

Содержание The Galaxy 65



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды