Page 25
13. Cleaning and maintenance
13.1 Cleaning
The frame may get dirty during use. It is very important to clean the frame as described in these
instructions.
Clean the frame with a damp cloth using lukewarm water and ordinary cleaning agents. Do not use
Corrosive/ abrasive liquids or abrasive cloths, brushes or sponges. After cleaning dry the frame.
13.2 Maintenance
The frame is maintenance-free and the moving parts have been lubricated for life. For reasons of
safety and reliability we recommend inspection of the frame once a year.
During inspections:
➢
Check that all bolts have been tightened.
➢
Check that the frame moves freely from bottom to top position without problems.
➢
Resetting the frame:
Press DOWN on the control switch and move the frame to bottom
position. Press DOWN once more and keep the switch depressed for 5 sec. to reset the
control unit. Check that the movement is even and smooth. Make sure that the mains cable
moves freely.
➢
Check that water and waste pipes are tight and undamaged.
➢
Check that all cables have been fitted correctly and are undamaged.
After each inspection the service schedule shall be filled in. See item 12.3.
Only use Ropox original spare parts as replacement parts. If other parts are used, the
guarantee may become void.
The frame must not be connected to the mains voltage during cleaning.
Do not flush electrical components with water.
Inspections, service and repairs must be carried out by competent personnel
