ROOTS RootsScrub E4043, Руководство оператора

Страница: 26 / 40

26 RootsScrub E4043
MAINTENANCE
MAINTENANCE WORK
Compliance with our recommendations concerning
maintenance work will give you the certitude of always having a
machine at your disposal, which is ready to work and in good
operating condition.
Please contact your local Roots Multiclean Ltd. dealer. The
people there will be glad to perform that work for you. Their well
trained personnel and genuine Roots spare parts are at your
disposal.
l
In case of any inquiry or order for spare parts, please always
quote the machine's serial number mentioned on the
nameplate.
l
The name plate is fixed in the rear side of the machine.
l
When cleaning or servicing the machine, and when
replacing any part, shut off the machine and on principle
disconnect the power plug from the power supply.
l
For reasons of safety during cleaning and/or maintenance
work in or on the tank, the tank lid - when lifted - must be
secured so as to prevent accidental closing or tilting down.
l
The machine may be taken into operation only if all guarding
devices are fitted and in protective position. As far as
possible, cleaning should not be done by hand, but using
appropriate tools or equipment.
l
Maintenance and repair work may be carried out only by
means of suitable tools and by the people trained in the
factory. For reasons of safety, only genuine Roots spare
parts may be used.
WARNING
è
Maintenance and/or repair opera ons must be done by
skilled and authorized personnel; all opera ons on
electrical devices are to be performed by specialized
personnel only.
è
Read this manual thoroughly before performing any repair
or maintenance opera ons.
è
For repair and/or maintenance of high reach areas of the
machine, use a suitable work li or working pla orms.
è
Use genuine Roots spare parts ONLY which are specifically
designed for the machine.
è
USE suitable PPE at all mes when working or servicing the
machine.
IMPORTANT!
è
ALWAYS SWITCH OFF AND REMOVE KEY
BEFORE PERFORMING ANY MAINTENANCE
OR REPAIR WORK.
è
ALWAYS ATTACH A 'DO NOT START' OR SIMILAR WARNING
SIGN TO THE KEY SWITCH OR A CONTROL BEFORE
CLEANING OR SERVICING THE MACHINE.
DO NOT START
DANGER
This sec on describes the maintenance of the machine under
the following topics:
è
DRAINING THE DIRTY WATER TANK
è
DRAINING THE FRESH WATER TANK
è
CLEANING THE DIRTY WATER TANK
è
CLEANING THE FLOAT
è
CLEANING THE FRESH WATER TANK
è
CLEANING THE FRESH WATER FILL PORT FILTER
è
CLEANING THE SQUEEGEE
è
CLEANING THE SQUEEGEE LIPS
è
CLEANING THE DISC BRUSHES
è
CLEANING THE CATCH HOLDER
è
CLEANING THE MACHINE
è
SEALS
è
PUSHING & TRANSPORTING THE MACHINE
è
ELECTRICAL MAINTENANCE
è
STORING THE MACHINE
è
FREEZE PROTECTION
è
MAINTENANCE SCHEDULE CHART
MAINTENANCE TOPICS