ROOTS RootsScrub E4043, Руководство оператора

Страница: 21 / 40

21 RootsScrub E4043
MACHINE OPERATION
INSTALLATION/REMOVAL OF DISC BRUSH:
Installation of disc brush:
Removal of disc brush:
Ÿ
Ensure that the tanks are empty.
Ÿ
Lift the squeegee.
Ÿ
Place the disc brush in front of the machine.
Ÿ
Ensure that the brush head is raised.
Ÿ
Move the machine forward till the brush head aligns with the
center of the brush.
Ÿ
Lower the brush head by pressing the pedal.
Ÿ
Plug the power cord to mains, switch On mains.
Ÿ
Press the brush motor switch (a) till the brush locks itself to
the brush head catch.
Ÿ
Ensure that the tanks are empty.
Ÿ
Lift the squeegee.
Ÿ
Lift the brush head.
Ÿ
Press the brush release switch once.
Ÿ
Move the machine backwards.
Ÿ
Brush is now lying in front of the machine.
Align disc brush to
center of brush head.
Catch Holder
Disc Brush
The disc brush must snap in immediately. A
rattling noise indicates that the brush head is
not centered properly. Turn Off brush motor
switch, correct the position and try again till the brush locks
itself in the catch.
NOTE
Brush Release Switch
(Disc brush now in front of the machine)
Do not operate the brush release switch when the brush motor
switch is in On position.
WARNING
a
E4043