Rooster Sensor 100, Руководство пользователя

Страница: 5 / 16

Rooster ™ Sensor100 USER MANUAL 62320MN000-A02
Rooster
TM
Sensor100 USER MANUAL 62320MN000-A02 5
Toggle Temperature Type
Instantly toggle displayed temperature units from Fahrenheit to Celsius or vice versa by pressing on the
displayed temperature reading on the home screen.
>Home
Password-Protected Access Tiers: Certifier & EH&S
Password protected access tiers enable advanced configuration options and features.
Home> Settings>System>Advanced>Change Passwords
USB Interface for Field Upgrade Procedure
Firmware upgrades can be installed on-site via USB flash drive.
Customizable Boot Screen
Our engineers can configure your unit with a custom image or logo file (240x320) in portable network
graphic (.png) format to display on bootup. Contact our sales team to get started:
sales@degreec.com
Night Setback
EH&S or Certifier users can configure 3 convenient modes (Audible, Muted, or Off) of operation.
The Rooster
TM Sensor100 is a N/O device, to trigger audible or muted night setback, the dry contact relay
must be closed. See Page 10 for instructions on how to setup night setback alarm thresholds.
Home> Settings>System>Alarms/Sound>Alarm Controls>Night Setback
Alarm Latching
EH&S or Certifier users can setup latched alarms to indicate that a low airflow state has occurred in the
“ Alarm Controls ” menu. User must then enter EH&S or Certifier passcode to unlatch an alarm.
Home> Settings>System>Alarms/Sound>Alarm Controls>Latch Alarm
Alarm Ringback
EH&S or Certifier users can configure the amount of snooze time before an alarm rings again after being
muted
in the “ Alarm Controls ” menu.
Home>Settings>System>Alarms/Sound>Alarm Controls>Ringback
Backlight Dimming
Users can toggle the brightness setting, as well as the brightness of the screen when set to “dim”.
A “time before dim” option is available that sets the screen to dim after a predetermined amount of time
has expired.
Home> Settings>System>Brightness
Airflow Resolution
EH&S or Certifier users can select the resolution of air velocity units displayed in m/s, fpm, or cfm
Note : cfm can only be displayed once duct diameter information has been entered; see page 13 of this
manual for more information.
Home>Settings>System>Advanced>Airflow Resolution