ClicSeam™ Safety and Installation Manual
4
»
Introduction
This manual contains essential information about electrical and mechanical installation
that must be followed before handling, installing and maintaining our Product. In addi-
tion, this manual contains safety information one needs to be familiar with.
»
Disclaimer of Liability
All the information contained in this manual is the intellectual property of the Roofit Solar
Energy OÜ and is based on the technologies and experience acquired and accumulated
by the company. This manual does not constitute a warranty, either explicit or implicit.
Roofit Solar Energy OÜ does not assume responsibility and expressly disclaims liability
for any loss, damage, or expenses arising from or in any way related to the installation,
operation, use or maintenance of our Product. Roofit Solar Energy OÜ assumes no re-
sponsibility for any infringements of patents or other rights of third parties that may
result from the use of our Product.
Roofit Solar Energy OÜ reserves the right to make changes to the Product, the specifica-
tions, or the installation manual without prior notice. Failure to comply with the require-
ments listed in this manual will void the warranty provided by the Roofit Solar Energy OÜ.
The mechanical and electrical installation of PV systems must be carried out with all appli-
cable codes, including electrical codes, building codes and electric utility interconnection
requirements. These requirements may vary from country to country. Contact local au-
thorities for applicable regulations. The product must be installed by a qualified person.
The electrical connection must be made by a certified electrician. Planning the location of
the product on the roof should be carried out by a competent professional with experi-
ence in planning PV systems.
