ClicSeam™ Safety and Installation Manual
6
Main Precautions
Always follow the safety precautions listed below when dealing with Roofit.solar
Product:
•
Do not keep the Product packages open outdoors until they are ready to be installed.
•
Transport and store the Products in appropriate packaging in a ventilated, rainproof,
and dry location.
•
Always use electrically insulated tools and gloves while working on the electrical
connection of the Product.
•
Be careful with the sharp edges and corners of the Product.
•
DO NOT disconnect/connect electrical connections under load.
•
DO NOT install the Product in adverse conditions (rain, strong or gusty winds, wet
or frosted roof surfaces, etc.).
•
DO NOT use mirrors or other magnifiers to concentrate sunlight onto the Product.
•
DO NOT overbend or apply stress to the cables.
Observe the recommended cable bend radius following
the supplier’s data sheet.
•
Ensure that all electrical connections are properly
secured and protected from unwanted interference.
•
Before installation, make sure that all the PV4 connectors have blue dust caps on.
Remove the dust caps only prior making electrical connections.
•
DO NOT lift the Product by grasping junction boxes.
•
DO NOT drop the Product or drag it over any surface.
•
DO NOT attempt to install or service the PV system unless you are qualified to do so.
•
DO NOT attempt to open the junction box, repair, modify or disassemble the Product.
Observe bending radius
