RONK VIGILANT Series, Инструкция для владельца и по установке

Страница: 5 / 28

Ronk Vigilant
®
Owner’s and Installation Manual 5
INTRODUCTION
Thank you for your purchase of a Ronk Vigilant
®
Series Automatic
Transfer Switch (ATS). This product is designed for use with standby
generators. This ATS may have different installation requirements
depending on the generator manufacturer or design. When operated
and maintained according to the instructions in this manual, your
system will provide many years of standby electrical energy service.
This manual contains important safety instructions for installation
and operation of this ATS. We have made every effort to provide
safe, efficient instructions for installation and operation. However,
as every installation is unique, it is impossible to anticipate every
possible procedure and method to obtain a properly installed unit.
It is important that you read and understand these instructions
thoroughly before attempting to install or operate this unit. Your
equipment is supplied with this combined Installation and User
Manual.
This is an important document and should be retained
by the owner after the installation has been completed.
This ATS requires professional installation before use. Refer to the
installation section of this manual for instructions on installation
procedures.
Only licensed electrical contractors should install
an ATS. Installations must comply completely with all federal,
state and local codes, standards and regulations. Your installer
should follow these instructions completely. Every effort has
been made to ensure that the information in this manual is both
accurate and current. However, the manufacturer reserves the
right to change, alter or otherwise improve the system at any time
without prior notice.
NOTICE
Please check with the generator manufacturer to ensure the
Vigilant
®
switch is compatible.
Contact Information
There are several ways to contact us for answers to questions you
may have about your product. Contact Technical Services
by phone at 1-217-563-8333 Monday through Friday 8 AM to
4:30 PM Central Time or email sales@ronkelectrical.com.
For your future reference, record the following pertinent information.
This information will help to identify product information should
you need to contact Ronk’s Technical Services department.
ATS
Model Number: ____________________________________
Description: _______________________________________
Serial Number: ____________________________________
Installation Date: ___________________________________
Generator
Model Number: ____________________________________
Description: _______________________________________
Serial Number: ____________________________________
Installation Date: ___________________________________