Ronix 2210C, Руководство пользователя

Страница: 7 / 10

IMPACT DRILL
6
.
ADJUSTING THE DEPTH STOP GUIDE
- The second handle has a retainer for the depth Stop Guide.
- Insert a drill.
- Now release the handle.
- Push the bit stop forwards until its end is in line with the end of the drill.
Now push the depth Stop Guide back until the distance between the end
of the bit and the end of the drill corresponds to the depth to which you
would like to drill.
.
INSERTING THE DRILL
First remove the mains supply from the socket. Turn the ring of the drill
chuck until the clamping haws are open wide enough. Insert the drill into
the clamping jaws of the drill chuck. Insert the end of the drill chuck key
into one of the three holes on the body of the drill chuck and let the head
of the key lock into place in the ring of the drill chuck in order to lighten
the clamping haws and fix the drill in place. Turn the drill chuck key in
a clockwise direction. Important: Then remove the key from the chuck.