Ronix 2210C Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 10

Ronix 2210C Скачать руководство пользователя страница 6

USER MANUAL

5

.

SPRCIAL SAFETY INFORMATION FOR DRILL

- When drilling screwing into walls, ceiling etc. make sure beforehand
that you will not damage any hidden electric cables, during this work you
should not touch metal parts of the machine. Only touch the machine by
the plastic housing.
- Your machine is double insulated. This means that two completely
independent types of insulation prevent you from coming into contact
with live metal parts. This measure represents s high degree of protection
against an electric shock.

OPERATION & USE

WARNING!

When performing the following work, always ensure that the machine is
not connected to the mains power supply.

.

INSERTING THE SECOND HANDLE

In order to assemble the second, the second handle, release it by
rotating lower part anti-clockwise so that you can easily pull the handle
over the drill chuck on the flange located behind it. Then turn the handle
to working position that is comfortable for you and fix it in place by
tightening it (rotating the lower part clockwise)

«
...
4
5
6
7
8
...
»

Содержание 2210C











Отзывы:

Нет отзывов