Ronix 2210C, Руководство пользователя

Страница: 8 / 10

USER MANUAL
7
.
WORKING WITH THE DRILLING MACHINE
Ensure that the mains power supply voltage is the same as the operating
voltage of your machine. For details, please see the type plate. Insert
the correct drill for the type of job to be performed. If necessary, adjust
the bit stop.
The more the operating switch is pressed in, the faster the drill rotates.
Set the direction switch to the desired direction of motion. Never alter
the position of the percussion drilling switch or the direction switch when
the machine is switched on. The machine is switched on by pressing the
operating switch. When the operating switch is released, the machine
stop. If you would like to use continuous operation press the locking
button while the operating switch is pressed. In order to switch off the
machine during continuous operation, press the operating switch again
the operating switch again and then let it go. Do not touch the drill chuck
while the machine is switched on.
Lock Button
Speed Selection
Direction
DRILLING TIPS
- Always insert the correct size and drill or screwdriver.
- Set the machine to the correct speed.
- Always hold the machine tightly by the handle and second handle.
- When drilling wood and metal, set the percussion drilling switch to drilling.
- When drilling masonry, set the percussion-drilling switch to
percussion drilling.
- When using the machine as a screwdriver, set the percussion- drilling
switch to drilling.