RFNC-001
IMPORTANTES DIRECTIVES DE SÉCURITÉ
14
ENGLISH
FRANÇAIS
23. STAY ALERT.
Keep hands and body away from the path of any potential fired
fastener. Watch what you are doing & use common sense. Don’t operate any tool
when you are tired or under the influence of drugs or alcohol. Check prescriptions to
determine if there could be a problem.
24. PREVENT ELECTRIC SHOCKS.
Prevent body contact with grounded surfaces:
pipes, radiators, ranges, and refrigerator enclosures. Before driving fasteners into
walls, floors, or wherever “live” electrical wires may be encountered, check whether
there is a danger of shock.
25. KEEP WORK AREA CLEAR
of obstructions.
26. STORE IDLE EQUIPMENT.
When the tool is not being used, it should be cleaned,
and stored in a clean dry place out of the reach of children.
27. EMPLOYERS
must enforce compliance with the safety warnings and all other
instructions in this manual. Keep it available for use by everyone assigned to use
this tool.
WARNING!
The warnings, cautions, and instructions detailed in this manual cannot
cover all possible conditions and situations that occur. It must be understood by the
operator that common sense and caution are factors that cannot be built into this
product, but must be supplied by the operator.
UNPACKING
Magnesium 15 degree Framing Coil Nailer 1
S3 Hex Key
1
S4 Hex Key
1
S5 Hex Key
1
S6 Hex Key
1
Manual
1
If anything is missing or broken, contact your retailer or call toll-free 1.888.267.7713.
n
n
n
n
n
n
SPECIFICATIONS
TOOL
Operating pressure: 70 - 120 PSI / 483 to 827 kPa / 4.8 to 8.3 bar
(max. 120 PSI / 827 kPa / 8.3 bar)
Air consumption: 0.17 cu. ft. / cycle @ 100 PSI / (4.77 litres / cycle @ 690 kPa)
Air Inlet: 1/4” NPT
Tool weight: 8.2 lbs (3.7 kg)
Pkg. weight: 15.4 lbs (7 kg)
FASTENERS
The RFNC-001 is a light duty, coil fed, pneumatic nailer, using compressed air as a
power source. It is designed to install (2” - 3-9/16”) 9 ga. to 8 ga. spiral, ring or smooth
wire-collated nails with a collation angle of 15 degrees (
fig.1
). The tool is made with a
magnesium alloy body and cylinder cap to provide light weight while maintaining high
strength and rigidity. Figure 2 names the major components of the RFNC-001:
n
n
n
n
n
!
IMPORTANT SAFETY INSTRUCTIONS
