19
FRANÇAIS
ENGLISH
070919
FUNCTIONAL DESCRIPTION
OPERATING INSTRUCTIONS
INSTALLATION AND LOCATION
Locate the compressor in a clean, dry and well-ventilated area, on a firm
level surface. It should be located 12” to 18” (30 to 4 cm) from a wall or any
other obstruction that would interfere with the air flow. It is equiped with heat
dissipation fins that allow for proper cooling. Keep them and other parts free of
dust or dirt that could interfere with cooling. A clean compressor runs cooler and
provides longer service. Do not place anything on top of the compressor.
WARNING!
Do not use lead-tin solder to join pipes and fittings. It can melt at
the temperatures of the compressor’s air discharge and cause the piping to
burst.
EXTENSION CORDS
If you plan to use an extension cord when operating your air compressor, please
note:
Maximum length: not to exceed 0 ft. (1 m)
Minimum wire size: 14 gauge.
If the extension cord is too long or the wire size is too small, the air
compressor will not start.
COMPRESSOR LUBRICATION
1. CHECK THE OIL quantity and quality before operating the compressor. Do
not add or change oil while the compressor is in operation. Use only oil with
the correct specifications
2. Be sure the air compressor is on a level surface
!
