Page 2
safety warnings
For your own and other’s safety please read this USER’S MANUAL and follow its instructions
carefully.
△
Danger
1
、
Never use the heater where flammable vapors may be present, there is danger of
explosion, fire and burning.
2
、
Always provide adequate ventilation during the use. Only use the appliance in well
ventilated area, the air must be regular exchanged during the use (two times/one hour,
inadequate burning caused by oxygen shortage can cause carbon monoxide poisoning.
△
Warning
1
、
It’s need a standard reducer and hose when you use this machine. (specification of
reducer
：
pressure Pu=700mbar
，
flow rate Qn=1.5kg/h
）
2
、
D
on’t use spay products at the location where the heater is used
，
the gas from the spay tin
can cause danger of fire and explosion.
3
、
Don’t use the appliance in place with combustible powder
（
wastepaper, wood crumbs,
fibre scraps
，
if these powder are sucked in the heater and heated up, flake and spark may
be ejected out and cause fire and burning danger.
4
、
Never block air inlet or heating part
，
it can cause abnormal burning and fire.
5
、
Never modify the heater, alteration may cause malfunction and fire, is very dangerous.
6
、
Don’t expose the appliance to rain or snow, never use it in humidity places either. Pull out
the plug before the routine maintenance and examination.
△
Attention
1
、
In order to prevent fire while in operation, please don’t place articles near the heater. Keep
all combustible materials away from heater. Minimum clearances: Outlet (front) 2.5M
，
air
inlet (rear) 2M
，
top 2M
，
side 2M.
2
、
While in operation
，
make sure that the ground surface does not overheat
，
overheating
may cause fire.
3
、
Do not fill fuel tank while heater is in operation, make sure the heater stopped and the
flame extinguished before you fill the tank. Filling while in operation may result causing
fire.
3
、
Before use the appliance, make sure that the voltage and frequency on site is in
accordance with the ones shown on rating plate.
