Page 11
Trouble shooting
Problem
Heater
does not
start
Heater
does not
ignite
Flameout
while
burning
Insufficient
heat input
Solution
No power
Make sure the
power is proper
connected
Low voltage
Resolve the
problem which
causes low voltage
Flame failure
protection
handspike was not
pushed to proper
position
Push the
handspike to
proper position
Gas exhausted
Replace the gas
cylinder
Power failure
Re-ignition after
the power
recovers
The knob was not
set at maximum
setting
Adjust the knob to
maximum setting
The knob was not
set in the proper
setting position
Adjust the knob
setting
Thermostat
operated
Remove the cause
after the heater
cools down, then
ignite and operate
the heater
Others
Contact service
personal or your
dealer
