14. Care and Maintenance
Remember if you have any doubts or queries regarding the assembly, maintenance or
use of this equipment, please contact ROMPA
®
.
Wipe with a clean damp cloth and a general purpose non-
abrasive cleaning solution. Do not use solvents such as
white spirit. Do not douse the coverings with water as they
contain foam. Wipe up any accidental spills immediately.
All of the following points should be checked on a monthly
basis and recorded on the checklist provided:
Check eye bolts for loose nuts or movement. Tighten if
necessary.
Check for loose nuts on all bolts. Tighten if necessary.
Check eye bolt for wear at the point where it rubs against the
safety snap. If wear exists, it should not exceed 30% of the diameter of the eye bolt.
See image above.
A small amount of grease at the point where the eyebolt and safety snap connect will
greatly extend the life of the eyebolt and safety snap.
Check the frame covers are clean and correctly positioned with all buckles tight.
Tighten as necessary.
Wear
pattern
(unsure)
