26
C.) Making bags from a foil roll
1.) Cutting the foil to size
2.) Preparing the appliance for operation
• Completely unwind the power cord from the cord storage.
• Insert the plug into a socket. All pilot lamps light up for a short time.
• For unlocking the upper part, fold the handle upwards.
• Open the upper part of the appliance up to the stop.
• The appliance is in standby mode. The pilot lamps above or below the buttons “Lebensmittel“ and
“Pumpleistung” light up.
• Then close the upper part of the appliance
• For locking the upper part, fold the handle down (position “down“). As soon as the handle is in
the correct position, the first pilot lamp of the status display lights up. The appliance is ready for
operation now.
3.) Starting the automatic programme
• Unroll the desired length of foil from the foil roll.
• Close the cutting device and pull the integrated knife
with light pressure from the far left to the far right
until the stop.
• To start the programme, press the button
“Automatik / Stopp“.
Note: The operation can be stopped at any time by
pressing the button “Automatik / Stopp“ once again.
Note: To avoid overheating, the appliance
automatically stops after one minute of extraction
time, if the bag is not tight.
• Place an open end of the foil on the sealing bar.
• The foil must not lie on the sealing or
• extend into the vacuum chamber.
Note: Always ensure the correct position of the foil.
