Rommelsbacher CT 2020/IN, Инструкция по эксплуатации

Страница: 33 / 40

33
The values indicated below are reference values and apply to standard steel pots of 20 cm Ø.
level 01
60 °C
level 04
100 °C
level 07
160 °C
level 10
220 °C
level 02 80 °C level 05 120 °C level 08 180 °C
level 03 90 °C level 06 140 °C level 09 200 °C
NOTE:
A sensor in the centre of the cooking zone checks the temperature at the bottom of the cookware.
The regulation will only function properly if the cookware covers this area. The cookware should have a
flat and not too thick bottom to ensure a good heat transfer. The maximum tolerable temperature for the
“temperature level” mode is 220 °C.
Changeover between “power level” and “temperature level” mode
• You may change at any time from the “power level” mode to the “temperature level” mode and vice
versa. The last selected setting of the respective function is stored.
• During operation in “power level” mode touch
the sensor “Function“ for a changeover to
“temperature level” mode.
• Tapping the sensor is confirmed with a signal tone.
• During operation in “temperature level” mode
touch the sensor “Function“ for a changeover to
“power level” mode.
• Tapping the sensor is confirmed with a signal tone.
Setting the operating time (Timer) – from 1 up to 180 minutes
• The timer can be activated in the “power level” mode as well as in the “temperature level” mode.
• For activating the setting of the operating time,
touch the „Timer“ sensor.
• The appliance automatically switches into the
“Timer“ mode.
• Tapping the sensor is confirmed by a signal tone,
while the display shows “0:00“ and the pilot light
”Timer“ is lit continuously.