Rommelsbacher CT 2020/IN, Инструкция по эксплуатации

Страница: 31 / 40

31
Cooking in “power level” mode (perfect for boiling water or for steaming)
• Tap the ”Function“ sensor once.
• The appliance automatically switches to power
level ”06“.
• Tapping the sensor is confirmed by a signal tone,
while the display shows ”06“ and the pilot lamp
“Power“ is lit continuously.
NOTE:
In case the appliance had not been separated
from the power supply after its previous use
the display shows the last set power level as a
suggestion.
• By placing a finger on the “Slider touch“ area and
moving the finger to the right, the power can be
increased up to level "10".
NOTE: For further possibilities of modifying the
settings, please refer to point “Touch Control”
sensors.
• By placing a finger on the “Slider touch“area and
moving the finger to the left, the power can be
reduced down to level "01".
NOTE: For further possibilities of modifying the
settings, please refer to point “Touch Control”
sensors.
• By default the “power level” mode is displayed by the figures “01” to “10”. By simultaneously touching
the “+” and “-“ sensors for 3 seconds the display switches over to show the power values instead of
the power levels; this means for example that “100” is displayed instead of “01” and “800” instead of
“06”, etc. This format is valid until the user will set it back. The selected display format remains saved
also after switch-off. Only after pulling the power plug or a cut-off from the power supply, there is a
reset of the control to the default format with the figures “01” to “10”.
• The values indicated below are reference values and apply to standard steel pots with 20 cm Ø.
CT 2020/IN CT 3420/IN – left side CT 3420/IN – right side
level 01 100 W 100 W 100 W
level 02 200 W 200 W 200 W
level 03 350 W 350 W 300 W
level 04 500 W 500 W 400 W
level 05 650 W 650 W 500 W
level 06 800 W 800 W 600 W
level 07 1000 W 1000 W 700 W
level 08 1250 W 1250 W 900 W
level 09 1500 W 1500 W 1100 W
level 10 2000 W 2000 W 1400 W