29
Assembling and demounting the appliance
Warning – hazard of injury and burns! Base surfaces, control unit, grill plate, splash guard/
wind shield and food are getting hot during use!
For safe operation it is important that the grill plate is correctly positioned on the base
and that especially the electrical connections of the grill plate as well as the control unit
are absolutely dry and clean (free of grease)!
Before assembling and demounting the appliance, make sure that it is disconnected from
the mains!
Assembling the appliance
• Inserting the drip pan
For inserting the drip pan, take the pan and place it in the intended recess. Make sure that it is
positioned correctly!
• Inserting the grill plate
Prior to inserting the grill plate, the control unit must be removed. To do so it is necessary to
unwind the whole power cord first.
Take the grill plate and place it on the rim of the heat protecting plate. Make sure the electrical
connections face towards the recess for the control unit. Lower the grill plate carefully. Make sure that
the grill plate feet stand correctly in the intended joints. Make sure that the grill plate is positioned
correctly!
• Inserting the control unit
Place the control unit on the intended slide-in rail of the base. Take the rear side of the appliance with
one hand and push the control unit backwards as far as it will go with the other hand. Mind the power
cord!
NOTE:
Do not operate the grill without drip pan!
