I.
Applying the Cuff
1. Plug in the cuff connecting tube into the unit
and unwrap the arm cuff, leaving the “Index”
end of the cuff through the D-ring.
2. Put the cuff on your left arm, make sure the
air tube is in the inside of the elbow.
3. Turn your left palm upward and adjust the
edge of the cuff at approximately 2-3cm above
the elbow.
4. Adjust your cuff’s air tube, the air tube shall
lie over the brachial artery on the inside of the
arm. The tube should run down the centre of
the arm.
5. Tighten the cuff by pulling the ‘Index’ end of
the cuff.
Note:
The “PROPER FIT RANGE”.
If the Index arrowhead falls within the
“PROPER FIT RANGE”, it indicates that this
cuff is suitable for you. If the Index arrowhead
falls out of the “PROPER FIT RANGE” you
may need a small/large cuff for measurement.
Please consult your seller about changing cuff.
9
