6
Turn off the power and disconnect the power plug from the wall outlet before replacing
the projector lens.
●Accidental projections may cause eye damage.
●If the projector lens is replaced without disconnecting the power plug, electric shocks
will result.
Disconnect the power plug from the wall outlet before cleaning or replacing any components.
Electric shocks can result if this is not done..
●On use/installation
Do not place any heavy objects on top of the projector. Otherwise, it may cause the projector
to become unstable or fall, and result in personal injury or equipment damage, and the
projector will be damaged or deformed.
Do not put your weight on the projector. You could fall or the projector could break,
and personal injury will result.
●Do not allow children to stand or sit on the projector.
Do not place the projector in extremely hot locations. Doing so will cause the outer casing
or internal components to deteriorate, or result in fire.
●Take particular care in locations exposed to direct sunlight or near electric heater accessories.
When moving the lens, do not put your hand into the opening next to the optical lens.
Doing so may result in injury.
Do not place the projector in locations that may be affected by salt or corrosive gases.
Failure to observe this may result in falling due to corrosion. In addition, corrosion can
also cause failure.
When using the projector, do not stand in front of the lens. Doing so may cause damage
and burn clothes.
●The projector lens emits strong light.
When using the projector, do not place objects in front of the lens. Do not place objects
in front of the projector lens to avoid blocking the projection. Failure to observe this may
result in fire or object damage and may cause projector failure.
●The projector lens emits strong light.
Unplug all cables from the projector before moving the projector. Moving the projector
without unplugging the cables may damage the cables, thus resulting in fire or electric
shocks.
When installing the projector on the ceiling, do not allow the mounting screws and power
cord to come into contact with the metal components inside the ceiling. Contact with
metal components inside the ceiling may result in electric shocks.
Important safety tips!